Installation

 Flush-M™ For Mercury® Installation

1. Remove the original OEM plug from the engine cowling.
2. Unscrew the OEM plug from the 3/4" female hose receptacle.
3. Separate the OEM plug from the lanyard by rotating it in a counterclockwise rotation until free.
4. Fit the Flush-M™ Mercury® to the lanyard and the ¾" female hose receptacle.
5. Install the Flush-M™ Mercury® back into the engine cowling, securing it in place with a ¼ turn in a clockwise rotation.
   * Remove the engine cowling to ensure there are no leaks or hose kinks upon initial flushing.

 Flush-M™ For Suzuki® Installation

1. Remove the original OEM plug from the engine cowling.
2. Remove the cap from the Flush-M™ by twisting counter clockwise ¼ turn and pull outward.
3. Install the Flush-M™ into the cowling by rotating it in a clockwise direction until firm, using a 5/8^ths wrench for added leverage if necessary. Do not overtighten.